Bi-Pedal Robot
November 2016 - December 2016
Introduction
This was my first robot I built after getting inspired by a Make: Magazine. I decided to make something pretty simple but still allows me to learn basics of 3D printing and coding Arduinos.
Video
Here is a test video of its dancing capabilities. I also programmed it so it can be controlled via a remote controller (allowing the user to move it forwards, backwards, turn, and perform dance moves).
Hardware Parts
x1 - Arduino Uno
x1 - Servo Shield
x1 - IR Receiver
x1 - LCD Module
x1 - Piezo Buzzer
x1 - M3 Screws